یو پی اس تک فاز سکومک Socomec مدل ITYS ES

The solution for

• Control devices
• Electric lines

Advantages

High protection and high availability

• The ITYS ES series is a range of compact UPS systems available in 1000, 2000 and 3000 VA models with on-line double conversion technology (VFI) with sinusoidal absorption.
• ITYS ES guarantees permanent regulation of the output voltage and frequency. This technology is compatible with all IT and industrial applications and operating environments, installations with generator sets included.
• Wide tolerance on input voltage ensures that switchovers to battery mode are infrequent, significantly prolonging battery lifetime.
• Wide operating ambient temperature up to 45°C.
• Standard Over Voltage Control Device (OVCD) protects the UPS and the load from dangerous mains peak-voltages.
• UPS models with tropicalised (Conformal Coating) boards

Straightforward to install and easy to use

• The UPS is shipped ready for connection with internal batteries connected and charged.
• ITYS ES, with the manual bypass option is easy to install without any special plant engineering preparation, as it is equipped with built-in thermal protection.
• The LCD monitoring/control panel and a buzzer make the equipment extremely easy and intuitive to use. The graphic indicating the power distribution path shows at a glance whether or not the system is working as it should.
• Battery efficiency can be tested via the control panel or using dedicated software.

Operating efficiency and versatility

• The versatility of these models makes them suitable for protecting critical devices in the industrial field.
• The standard equipment and communication accessories have been specially designed to satisfy the typical needs of installation or use in transformer cabins (i.e. tropicalized boards).
• In situations where automatic power management procedures are required, the communication software can be used to programme scheduled start-up and shutdown times.
• Restarting the UPS from the battery to power the DG before closing the main isolator.

Standard communication features

• Embedded dry-contact interface.
• Input mains switch breaker.
• Power off the UPS remotely.
• Internal temperature sensor.
• ۱ slot for communication options.
• USB port for UPS management based on HID protocol.
• MODBUS RTU (RS232).
• LOCAL VIEW software for local UPS monitoring and shutdown for Windows, Linux and MAC Osx.
• Clear and uncluttered LCD interface for easy UPS monitoring, even for less specialist users.

Communication options

• Dry-contact card.
• NET VISION: professional WEB/SNMP Ethernet interface for secure UPS monitoring and remote automatic shutdown.
• Environmental Monitoring Device (EMD).
• REMOTE VIEW PRO supervision software.

Manual bypass (option)

 

Specially designed for ITYS ES, the manual bypass option enables: • simplified installation: connection to the system is made with industrial grade terminals, while connection to the UPS is via the pre-wired plug and socket supplied. • easy maintenance and uninterrupted operation: thanks to the manual bypass isolator it is possible to service or replace the UPS while maintaining the power supply to the devices downstream in complete safety for the operator. This operation has been specially devised to be simple to carry out, even in an emergency. • increased level of equipment immunity to surge voltages, typical for this type of application, thanks to suitable surge arrestors included in addition to standard UPS protection.

 

Technical data

ITYS ES – UPS Model ITY3-TW010B-ES ITY3-TW010B-ES ITY3-TW030K-ES Sn ۱۰۰۰ VA ۲۰۰۰ VA ۳۰۰۰ VA Pn ۱۰۰۰ W ۲۰۰۰ W ۳۰۰۰ W Input / output ۱/۱ Input Rated voltage ۲۳۰ V (1ph) 110÷۳۰۰ V; (160÷۳۰۰ V @100% load) Rated frequency ۴۰-۷۰Hz (50/60 Hz +/-5% Auto-Selectable) Power factor >0.99 Output Rated voltage ۲۲۰ / ۲۳۰ / ۲۴۰ V (± ۱ %) Rated frequency ۵۰/۶۰ Hz (± ۰.۱ Hz in battery mode) Overload up to 105% continuously; 125% x 3 min; 150% x 30 sec Crest factor ۳:۱ Connections ۴ x IEC 320 (C13) ۸ x IEC 320 (C13) ۸ x IEC 320 (C13) + 1 (C19) Batteries Type sealed lead-acid maintenance free – expected lifetime 3-5 years Back-up time(۱) ۱۲ min ۱۶ min ۲۳ min Sized for a back-up time of ۱۰۸ min @ 50 W ۱۳۰ min @ 150 W ۱۵۶ min @ 300 W Back-up time(۲) + switching back on ۶۰ min @ 50 W ۶۰ min @ 150 W ۶۰ min @ 300 W Battery test • • • Communication Interfaces RS232 – USB – Dry contact Ethernet adapter NET VISION (TCP / IP & SNMP) optional card Local communication software Local View Efficiency Online mode up to 93% Environment Ambient service temperature from 0 °C to +40 °C (up to 45 °C (۴)) Relative humidity < 95% non-condensing Maximum altitude ۱۰۰۰ m without de-rating Noise level at 1 m < 50 dBA UPS cabinet Dimensions W x D x H ۱۴۵ x 404 x 224 mm ۱۹۲ x 428 x 322 mm ۳۸۴ x 428 x 322 mm Weight ۱۴.۴ kg ۲۶ kg ۴۹.۳ kg Degree of protection IP20 Standards Safety IEC/EN 62040-1, AS 62040.1.1, AS 62040.1.2 EMC IEC/EN 62040-2, AS 62040.2 Product certification CE, RCM (E2376) ITYS ES – Manual bypass(۳) Sn ۱۰۰۰ VA ۲۰۰۰ VA ۳۰۰۰ VA Input Type of terminals CBD6 Wire size ۶ mm۲ max Bypass Switching positions ۱: UPS – 2: MAINS Switching time ۶ ms max Load output Type of terminals CBD6 Wire size ۶ mm۲ max UPS supply output Type of socket IEC 320 10 A IEC 320 16 A Surge arrestors (on request) Type “L” in compliance with IEC EN 61643-11 L/N pulse current ۴۰ kA (8/20) max VAC N/GND ۲۵۵ V max VAC L/N ۳۲۰ V max

(۱) @۷۵ % of rated load (models with internal batteries) PF 0.7.
(۲) Factory setting: back-up time limited to 60 minutes to permit subsequent restarting with battery.
(۳) Upon request.
(۴) Conditions apply.