ODOT Modbus Serial Port Module Model CT-5321

برند

اُ دات (ODOT Automation)

کشور سازنده

چین (China)

کد محصول

CT-5321

ODOT Modbus Serial Port Module Model CT-5321

CT-5321: Modbus Serial Port Module
Product Feature:

CT-5321 Modbus Serial Port Module

۱ Module Description

The Modbus serial port module supports 1 channel RS485/RS232 /RS422(optional), supports Modbus RTU/ASCII protocol, and supports master, slave and free transparent transmission mode.

The serial Module CT-5321 could be applied with the adapter modules, so it could convert Modbus into other protocols such as Modbus TCP, Profinet, EtherCAT, EtherNet/IP, etc. When the module is used, serial port parameters and Modbus instructions should be configured in IO Config software.

Devices with RS485/RS232/RS422 interface, which support modbus-RTU/ASCII, could be applied with CT-5321 to realize interconnection with upper PLC or upper computers. CT-5321 could be applied with devices such as: PLC, DCS, remote IO, VFD, motor start protection device, intelligent high and low voltage electrical apparatus, power measurement device, intelligent field measurement equipment and instruments, etc.

Product Details

Technical Parameters

General parameters

Power	Max.500mA@5.0Vdc
Isolation	I/O to internal bus: opto-couple isolation (3KVrms)
Field Power	Nominal:24Vdc, Range:20-28Vdc
Wiring	I/O Wiring： Max.1.5mm²(AWG 16)
Mounting Type	۳۵mmDIN-Rail
Size	۱۱۵۱۴۷۵mm
Weight	۶۵g

Environment Specification

Operational Temperature	-۴۰~۸۵℃
Operational Humidity	۵%~۹۵% RH(No Condensation)
Protection Class	IP20

Serial Port Parameters

Note: M represents the valid parameters of master mode, S represents the valid parameters of slave mode, and F represents the valid parameters of free transparent transmission mode

M/S/F:Channel Number	۱Channel
M/S/F:Interface	RS485/RS232/RS422
M/S:Protocol	Modbus RTU/ASCII
M/S/F:Working Mode	Modbus Master, Slave, Transparent Transmission
M/S/F:Baud Rate	۳۰۰bps-500Kbps
M/S/F:Data Bit	Bit 7, Bit 8
M/S/F:Parity Checking	None, Odd, Even
M/S/F:Stop Bit	Bit1, Bit2
M/S/F: Character Interval	۱.۵t-200t
F: Byte Order Conversion	Prohibit, Enable
M/F:Response Timeout	Customized， default： ۱۰۰۰
M/F: Polling Timeout	Customized， default： ۱۰۰
M: Read Data Processing Mode	Hold the last input value, clear the input value
M: Data Output Mode	Polling, event triggering (data changes)
M: Module Control Enable	Prohibit, Enable
M: Module Control Mode	Level trigger (continuously valid), rising edge trigger (single valid)
M: Power on Event Output	Prohibit, Enable
S:Slave ID	Customized， default： ۱
S:Response Time	Customized， default： ۵۰

برای بزرگنمایی کلیک کنید

برند	اُ دات (ODOT Automation)
کشور سازنده	چین (China)
کد محصول	CT-5321

مقایسه

فهرست علاقه مندی ها

توضیحات
درباره اُ دات (ODOT Automation)
ماژول ورودی/ خروجی چیست؟

توضیحات

Power	Max.500mA@5.0Vdc
Isolation	I/O to internal bus: opto-couple isolation (3KVrms)
Field Power	Nominal:24Vdc, Range:20-28Vdc
Wiring	I/O Wiring： Max.1.5mm²(AWG 16)
Mounting Type	۳۵mmDIN-Rail
Size	۱۱۵۱۴۷۵mm
Weight	۶۵g

Operational Temperature	-۴۰~۸۵℃
Operational Humidity	۵%~۹۵% RH(No Condensation)
Protection Class	IP20

M/S/F:Channel Number	۱Channel
M/S/F:Interface	RS485/RS232/RS422
M/S:Protocol	Modbus RTU/ASCII
M/S/F:Working Mode	Modbus Master, Slave, Transparent Transmission
M/S/F:Baud Rate	۳۰۰bps-500Kbps
M/S/F:Data Bit	Bit 7, Bit 8
M/S/F:Parity Checking	None, Odd, Even
M/S/F:Stop Bit	Bit1, Bit2
M/S/F: Character Interval	۱.۵t-200t
F: Byte Order Conversion	Prohibit, Enable
M/F:Response Timeout	Customized， default： ۱۰۰۰
M/F: Polling Timeout	Customized， default： ۱۰۰
M: Read Data Processing Mode	Hold the last input value, clear the input value
M: Data Output Mode	Polling, event triggering (data changes)
M: Module Control Enable	Prohibit, Enable
M: Module Control Mode	Level trigger (continuously valid), rising edge trigger (single valid)
M: Power on Event Output	Prohibit, Enable
S:Slave ID	Customized， default： ۱
S:Response Time	Customized， default： ۵۰